FAQ

• Our advantage:Nut internal thread grinding equipment and technology for Roller Screw Actuators

  Feb 27, 2025

  The internal thread grinding datum affects the taper of the thread busbar,the neutrality, the parallelism of the internal thread busbar and the outer diameter of the nut, and the runout of the internal thread busbar and the nut flange datum end face. The internal thread, external circle, and end face compound grinder can control the parallelism of the internal thread and the external circle, and can also control the perpendicularity of the internal thread and the flange surface. When the roundne...

  Read More
• Our advantage:Screw polishing technology for Ball Screws

  Feb 27, 2025

  Regardless of external thread or internal thread grinding, the grinding roughness is roughly Ra0.8. The conventional method is to use the running-in process to reduce the friction coefficient of the contact angle spiral. After running-in, replacing the steel ball actually changes the contact angle spiral that does not play a fundamental role in the case of high-precision heavy pre-loading. Our ground Ball Screws and nuts have passed the global grinding technology to control the roughness of the...

  Read More
• Our advantage:Non-annealed hard axle end process for Ball Screws Assemblies

  Feb 27, 2025

  In order to facilitate the processing of the shaft end, most manufacturers anneal the screw rod and then process the shaft end. However, during annealing, the threaded fairway near the annealed end will be deformed. After annealing, the oxide scale needs to be polished with a fiber wheel, which will also change the size of the threaded fairway. The hardness of the central shaft end and the threaded part are different, the stress relief is inconsistent, and the screw rod slowly deforms slightly....

  Read More