banner
Home

FAQ

FAQ

  • 1. Anodizing tank setup: The electrolytic cell is responsible for the entire electrolysis process and it is where the aluminum and cathode are immersed in the electrolytic cell. The electrolytic cell is usually made of chemically resistant materials such as polypropylene, PVC or coated stainless steel. To fix the anodes, the electrolytic cell comprises a rack mechanism which is further connected to the electrical busbar for a uniform and controllable power supply. On the other hand, a separ...

    Read More
  • 1. Preparation and cleaning: A uniform and smooth surface is essential for the application of the anodized layer. You can achieve this through mechanical treatment and chemical cleaning. Mechanical surface treatment such as grinding and polishing that remove surface irregularities and defects. While alkaline or acid cleaning removes grease, oil, dirt and any other contaminants, followed by rinsing with deionized water to remove residual cleaning agents. Therefore, etching can be furthe...

    Read More
  • What is anodizing ?
    Jul 03, 2025

    Anodizing is a surface treatment method that forms a thin protective oxide layer on the surface of the substrate through an electrochemical process to achieve a smooth and uniform surface treatment, with a roughness value (Ra) as low as 0.5µm. Anodizing can improve the firmness, corrosion resistance, wear resistance and aesthetics of aluminum alloy, magnesium alloy and titanium alloy accessories. Anodizing has a wide range of applications and is widely used in various industries such as me...

    Read More
  • 1.Aluminum extrusion profiles have high cross-sectional dimensional precision and have different precision due to different production processes. For high vacuum die-casting structural parts, the dimensional deviation is usually large due to the shrinkage and deformation caused by heat treatment of the castings, and the large deviation can reach 1~3mm. For aluminum extrusion profiles processes, the cross-sectional dimensional accuracy is generally higher, the dimensions are more stable and easie...

    Read More
  • As a transnational purchaser of medical machined parts processing, you need to pay attention to several aspects to ensure the objectivity and correctness of the purchasing decision-making process. 1.Experience and expertise: Choose manufacturers with rich experience and expertise, especially those with professional knowledge of the medical device industry for the required parts processing. 2. Equipment and technology: Understand the processing equipment and technology used by the manuf...

    Read More
  • There are four types of anodizing processes based on the acid bath type and thickness capabilities. Chromic Acid Anodizing (Type I) Type I is the ideal if you need a thin layer, especially for decorative and some functional uses. However, it can mimic the performance of Type II or hard coating after sealing. Meanwhile, the thickness of the layer ranges from 0.00002"-0.0001".    Sulfuric Acid Anodizing (Type II) This is the most common type and uses sulfuric acid as an electrochemi...

    Read More
  • 1. Anodizing tank setup: The electrolytic cell is responsible for the entire electrolysis process and it is where the aluminum and cathode are immersed in the electrolytic cell. The electrolytic cell is usually made of chemically resistant materials such as polypropylene, PVC or coated stainless steel. To fix the anodes, the electrolytic cell comprises a rack mechanism which is further connected to the electrical busbar for a uniform and controllable power supply. On the other hand, a separ...

    Read More
  • 1000:1050,1070 Aluminum Properties:High purity aluminum, electrical conductivity, thermal conductivity, corrosion resistance. Application:Conductive materials, heat exchange devices, chemical equipment piping   2000:2011、2014 2017、2117 2024 Aluminum Properties:Excellent machinability, high strength, low corrosion resistance Application: Duralumin is a general term for cutting materials, structural materials such as parts and screws, aircraft materials, forging materials, automobile and mo...

    Read More
  • The steel balls are assembled in units of 1 μm as it is a precision component. There will be some tolerances in screw grinding and nut grinding. It is the most undesirable method to assemble the Miniature Ball Screwscrew and nut separately and assemble them directly after processing. The screw and nut need a suitable steel ball gauge to match. The directly assembly method will have the human factors, and it is difficult to control the assembly preload to be consistent. Each of our nuts and th...

    Read More
  • The Ball Screws must be aligned before assembly to control the runout. It is calibrated to the corresponding runout value according to the accuracy level of the Ball Screws. The hydraulic and servo alignment processes are both cold alignment processes and It is qualified only if it jumps when shipped. As time goes by and the stress is released during transportation bumps, the Ball Screws will slowly rebound to the state before straightening.  We use a thermal alignment process to internally...

    Read More
  • The Linear Actuator parts material and heat treatment are the basic guarantees for high-quality Ball Screws and Planetary Roller Screw. We obey the superior alloy steel and the molding process must be spraying, not casting. Strictly required to use a two-ball, two-draw process, and the eutectic carbide must reach level 1 for Ball Screws Assemblies. After the materials need to be undergone a cold pressing process similar to "forging" to further optimize the metallographic structure. The cold...

    Read More
  • The cold-rolled screw rolling machine is a key for manufacturing Ball Screws and Planetary Roller Screw.Most manufacturers use "dovetail rail" structure thread rolling machine. The "dovetail rail" needs to be added with "shims" to adjust the matching clearance. The defect is it cannot be pushed axially if it is locked, and there will be radial deflection if the lock is loose, the Ball Screws Assemblies will have "black and white circles", the Ball Screws will have inconsistent contours and round...

    Read More
1 2

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Newsletter Signu

Sign Up for Exclusive Offers From Us

Contact Us :sales@kezhencomponents.com

Home

products

whatsApp

contact